Amped wireless extender sr10000 setup

Amped wireless extender sr10000 can be described as one of the range extenders with a powerful performance designed to work with multi-device households. It can be configured to your preferences. First, you should go through the amped wireless extender sr10000 setup procedure for the same. For more details on the configuration and login procedure, please go through this blog.

SR10000 Setup process

  • The first step is to think about an appropriate location between your router and the dead WiFi zone. The range extender needs to receive a clear signal from the router. It should have a signal strength of >70 per cent.
  • Connect your mobile or computer via the range extender.
  • Additionally, connect the antennas.
  • It is possible to connect the range extender to the power outlet today.
  • Connect to the WiFi range extender’s network.
  • Open any web browser and enter setup.ampedwireless.com in the browser. If the connection is not working, you can try with the IP that you have set as default.
  • You can locate the available networks by clicking the scan.
SETUP PROCESS
SETUP PROCESS
  • For the network, you want to replicate, click the. If you are using dual-band routers, Click on the dual-band router.
  • Set up the settings for your networks that extend now. You can enter your new ID manually for the web and the security code. Click next to save the settings.
  • Be sure not to quit or refresh the page.
  • It will then reboot and then shut down. Then, you’ll need to reconnect your computer to the network extension.
  • Once you’re connected, After connecting, select OK.
  • If there is a problem with the configuration, the setup wizard will notify you to rescan the network.
  • If the setup is free of errors, You will see the summary page of the setup.
  • The range extender has been fully operational.

Welcome tO dashboard of the AMPED EXTENDER

  • The dashboard will show the status of the current range extenders.
  • To locate available networks, Click on Scan.
  • Then, it would be best if you scan your home network for possible extensions. Choose the network which you want to extend. A low signal may undoubtedly decrease the speed. To continue, press the next button.
  • The router should be moved closer if your desired network isn’t evident.
  • It will be apparent whether the security is turned on in your network at home. If it’s enabled, then enter the code.
  • To continue, click the following button.
  • Then, you can configure the settings for your expanded network. Click Next to make any changes.
  • Join the extended network today.
  • In counting down, the extender will reboot and cut off your wifi connection. Connect your computer to the extender network.
  • After you have connected, click Next to complete the procedure.

AMPED Extender login process

You can update the extender settings and change them according to your wish. In this case, first, you have to log into the Amped wireless setup page. You can modify the wireless name and password. Upgrade the firmware on your Amped extender. Follow the steps listed below.

  • Connect your device to a power outlet, and then switch it on.
  • Then, you can connect the Ethernet cable to establish an adequate connection between your device and your computer.
  • On your PC, you can open any compatible browser and enter the default gateway setup.ampedwireless.com.
  • It is also possible to use your default address 192.168.1.240 to access the management web page for the extender.
  • Log in now to open the wizard for setting up. Enter the default username admin. Also, the password for admin, too. Hit the Login button right now.
  • Follow the easy on-screen instructions for the procedure.
  • You can also set up your device following Amped’s Amped setting up the wireless page.
EXTENDER LOGIN PROCESS

Troubleshooting Guide FOR AMPED SETUP

It is possible that you may encounter certain problems while working. You can study some of the issues below with their possible solution.

I AM UNABLE TO JOIN MY HOME NETWORK.

I am unable to join My Home Network.

  • Your Home Network may be secured. Make sure you have the proper security for connecting your Home Network.
  • Your smart Repeater could be too far away from your local network. Go through the Setup wizard once more. On the SCAN page, the page for the Home Network should show a signal strength that is 70% or higher. If it isn’t, then change, move your Smart Repeater further away from your network, attempt again.
  • Verify the router of your home network DHCP server is active. The smart Repeater requires an IP from your home network router.

Inability to locate Home Network when scanning for wireless networks

  • The Smart Repeater may be out of reach. Reposition the Smart Repeater closer towards the wireless router and run the Setup wizard in the web menu. It is suggested you use a home router that displays the signal strength to be 70% or higher.
  • Its Smart Repeater supports 802.11g/g/n 2.4 GHz routers. If your network is a dual-band router, it won’t work using this Smart Repeater. Modify the configuration of your dual-band router to block the band that operates at 5 GHz.
  • Click on the Smart Features tab on the menu on the web and then access the wireless coverage settings. Check that the settings are set to 100%. Try again.
  • Check the wireless SSID has been broadcasting and is not hidden. If the Home Network SSID isn’t visible, it is necessary to manually set up the intelligent Repeater. It can be done using the wireless settings > Home Network settings menu.

I can't connect to the internet via Smart Repeater/ had an electrical outage

  • Your connection with the home network is lost. It could result from many events that impact the wireless connection at home. You can rescan by accessing http://setup.ampedwireless.com to connect to and repeat.
  • Make sure that your wireless router’s home settings are not altered. Any modifications to the SSID or security number in the settings will cut off the Smart Repeater’s connection to your home network.
  • An outage in the power supply can result in an alteration of the network channel. To fix this, use the Smart Setup Wizard again from the menu on the web and then change the settings of your home network connection.
  • You may also create an endless channel number in your router to avoid this from happening when it happens again.
  • If you cannot access the menu for setting up, make sure that the Smart Repeater is still on. Then, reboot the smart Repeater by disconnecting the power adapter then connecting it again.
  • Examine whether your connection has been established by logging onto a site.
  • Log on to setup.ampedwireless.com and configure a new Home Network connection if you do not have a connection,
  • Verify the wireless router in your home is on. If it is shut off, make sure it is turned on. The smart Repeater will automatically connect with your Home Network within 10 minutes.

Connected to the home network but don't have Internet access.

  • It is possible that the Home Network itself may not provide internet access. Make sure you can access the internet via the Home Network first. If you can connect to the internet, this is not an issue. If you cannot access the internet, then your home network’s Internet connection needs to be fixed first.
  • It could be that you have a DNS issue, and the Smart Repeater isn’t obtaining its IP configurations from the Home network. Try rebooting your Smart Repeater and then access the site. If that fails, restart your Home Router to see if that solves the problem.
  • It could be that there is the possibility of an IP contradiction between the home networks and an Extended Network. Try to alter the IP settings on the Extended Network using IP values that differ from those of the Home Network.
CONNECTED TO THE HOME NETWORK BUT DON'T HAVE INTERNET ACCESS

Not able to connect to Smart Repeater wirelessly

  • Verify that your wireless adapter can support WPA2 security via wireless. If it doesn’t, you’ll need to modify the wireless security for the Repeater that is smart.
  • Navigate to the web menu and select Wireless Settings and Wireless security. Pick the Extended network in the drop-down menu. You can choose to disable protection or lower your security level to WEP. Try reconnecting again.
  • The connection to your home network might be off. Connect an Ethernet cable to link directly to your Smart Repeater. Access http://setup.ampedwireless.com. Now run through the Smart Setup wizard again. After you’ve successfully reset your Home Network connection, try reconnecting wirelessly.

Inaccessible to the web-interface

Once you’ve completed the setup for amped wireless, you’ll be able to connect to the numerous options that your router offers. The default gateway may not be working when trying to access the online utility. It could result in an error message that says the website isn’t available. These suggestions will assist you in fixing the issue.

  • Try restarting your device. This may fix the issue, and you won’t have to go on.
  • The ethernet cable connecting an amped router with the computer should be in good condition. It should not be damaged or broken.
  • The internet connection should be working without issue throughout. Call your Internet service provider immediately if your connection is not working correctly.
  • If your computer were connected to a router before that, you would join it to an amped wireless router.
  • Once you’ve done this, ensure that your firewall software is unaffected.
  • If your firmware is outdated, You can upgrade it. The performance of your router is affected by obsolete firmware. Visit the Amped Support site to download the most current firmware. You’ll receive better coverage from your Repeater’s WiFi after being upgraded.
  • To input an IP and gateway that is the default, be sure to use a compatible browser. You can try another browser if it doesn’t open.
  • The wireless router must be powered on to ensure it is working correctly.
  • The router and the device must be located close to one another.
RESET PROCESS

Reset process

You can do the reset of the range extender using two different methods.

  • Firstly, you can do this by clicking on the reset button on the web interface located on the left under additional options. After that, click on the management option, and save or reload settings. Choose the ‘reset settings to the default’ option.
  • There is also a physical reset button located at the lower part of the extender. Press the button. You can hold it for 5-10 seconds. You may require the paper clip to reach the switch. When you push the button, pressing it for less than 5 secs is enough to restart the extender’s range. Settings will then be restored on time.

Conclusion

The above article will explain the amped wireless extender sr10000 setup process and the login procedure with a troubleshooting guide. If you have any questions in the future or wish to learn more about the extender, don’t hesitate to get in touch with our experts today.